Click image to view original image
LHXG-1-type 2 3-axis CNC intersection Cutting-specific linkage (6.8 yuan / Taiwan from the sale)
Contact: Mr. Tang 13207158947 027-59841986
First, the model features
tube to meet the user's intersection Cutting, the company developed and produced special NC intersection Cutting.
its most important feature: for high-volume intersection professional cutting; production efficiency, cutting stability, good accuracy.
NC intersection Cutting special features:
1, head of the cut in a number of different directions and different diameters of cylindrical holes intersecting line to meet the head of the axis of branch pipe axis and eccentricity of the eccentric and non-perpendicular conditions.
2, to end the brace intersecting line cutting cylinder ends to meet the branch head of the axis of the eccentric axis and eccentricity of the vertical and non-intersecting, sloping intersection conditions.
3, can cut the pipe ends inclined cutting end.
4, can cut the pipe weld on the elbow, "shrimp festival" both ends of the oblique cut surface.
5, can be cut with the circular head of intersecting lines intersecting the branch ends.
6, can cut variable angle bevel surface.
7, to cut square hole in the pipe on the waist-shaped hole.
8, the pipe can be cut off.
cut sample pieces
Second, the basic configuration
mechanical parts
1, the cutting machine at rail length 3000mm (can be 3 m / section lengthened)
2, intersecting line rail components length 3000mm (can be 3 m / section lengthened)
3, 1 set of CNC cutting torch
4, automatic ignition 1 set
5, the gas tube with 1 set
6, the vertical rack and pinion drive
7, pipeline transmission mode horizontal towline
8, flame cutting gas oxygen, acetylene (or oxygen, propane)
9, plasma cutting optional wall thickness to achieve a plasma power
electric control part
10 NC NC system Wuhan pilot
11, drive / motor matching domestic or imported
three major technical indicators
cutting range 1, the maximum effective cutting diameter 1000mm
2, the minimum effective cutting diameter 30mm
(effectively cutting the basic configuration of the model pipe diameter :60-600mm, can be customized according to special requirements of users diameter)
Indicator 3 cutting, CNC flame cutting thickness of 6-80mm
4, CNC plasma cutting, plasma power wall thickness determined in accordance
5 machine performance, cutting torch landing distance 230mm
6, the machine speed 0-3500mm/min
7, set the speed error
